2.2
Operator controls and display elements
The figure below shows the operator controls and display elements of the DI 8x24VDC 4xM12
digital input module.
①
②
③
④
⑤
⑥
⑦
Figure 2-2
DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36680963-AB
DIAG: LED display for the diagnostic status
X10 to X13: Sockets for the input signal
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 7 for the channel status
Operator controls and display elements
2.2 Operator controls and display elements
Product overview
11