Basics
Basics
Performing Confidential Print (Windows-PCL Only)
This function is available in Windows only (not available in Macintosh).
Perform the Confidential Print according to the following outline steps:
1. Spool a print job in the printer.
Refer to
"Saving a Print Job" on page 48
Confidential Print instead of Check and Print and enter the password [Max. 16 numbers (0 - 9)].
The document is not printed when printing the document at step 4.
2. Print the desired copies of the document (see
Printing a Confidential Print Job
1
Press MENU/EXIT (PAUSE) button on the printer panel.
2
Press
(CONTINUE) button until Confidential Print menu appears.
3
Press ENTER button.
The sequential number and print job name saved in the hard disk drive is displayed.
NOTE:
• If no Confidential Print job is saved in the printer, the following message is displayed.
Windows
Performing Confidential Print (Windows-PCL Only)
Menu Mode
Confidential Print
Confidential Print
##:########
Confidential Print
No Job Available
Macintosh
(be sure to use the PCL printer driver). Select
"Printing a Confidential Print Job"
job name
number
58
below).