Troubleshooting; Printing A Test Print; Replacing Printer Components; See Page - Panasonic KX-P8415 Setup And Reference Manual

Troubleshooting

For the detailed information, refer to "Care and Maintenance" of the Operating Instructions installed on your
computer.

Printing a Test Print

Executing Test Print enables you to print the color
halftone pages (Cyan, Magenta, Yellow and Black)
to check the print quality.
1.
Press the MENU/EXIT button on the printer
panel.
Press the H H /ENTER button.
2.
Press the F F /CONTINUE
3.
The Test Print menu will appear.
Press the H H /ENTER button to print each color
4.
page.
Trouble
READY indicator is blinking.
READY indicator is off.
ERROR indicator is on.
ERROR indicator is blinking.
On the Test Print, a single color is
not uniform or many vertical
streaks (both light and dark) of
slightly different density and non-
uniform color.
button twice.
Possible Cause
The printer is receiving,
processing or printing job.
You have entered the Menu
mode in the printer panel.
The printer is not ready, is
disabled, or has detected an
error.
Error occurred that is not user-
correctable.
The printer has stopped because
it detected a user-correctable
error such as an open door or a
media jam.
The toner is almost depleted.

Replacing Printer Components

(see page 28)

It may need to replace the following components to
solve the trouble.
Charge unit
Color imaging unit
Fuser unit
Corrective Action
Wait for the job to be completed or
cancel the job.
Exit the Menu mode by pressing
the MENU/EXIT button.
Read the printer panel message to
determine the printer status.
Turn the printer off and back on
again. If the indicator is still on, the
printer requires service.
Correct the condition displayed on
the printer panel (e.g., close the
door or clear the media jam).
Replace the color toner cartridge.
Toner
cartridges
25