Performing Automatic Duplex Printing - Panasonic WORKIO DP-CL21 User Manual

Basics

Performing Automatic Duplex Printing

If the Automatic Duplex Unit option is installed in the printer, automatic duplex printing can be
performed.
1
Load paper into the Tray 1 (standard media tray), Tray 2*
• The following paper must be used. Otherwise, it may cause wrinkles or paper jam.
Media Type: Thin paper [60 – 75 g/m
Paper Size: Letter, Legal, A4 or B5 (JIS)
• Lay the paper straight if the paper is curled.
1
* Tray 2 and Tray 3 are tray of the Optional Paper Feeder.
2
Open a document to perform duplex printing and display the print window in
your application.
3
Select Panasonic DP-CL21P PCL 5c, Panasonic DP-CL21M PCL 5c or
Panasonic DP-CL21M PS printer and click Properties ([Preferences] for
Windows XP).
The printer properties window appears.
• The operation for displaying the printer properties window may be different depending on the
application software.
4
Set the printer driver to correspond with the paper loaded in the tray.
Media Type:
Paper Source:
Paper Size:
5
Turn the duplex print feature on depending on your selection at step 3.
For Panasonic DP-CL21P PCL 5c or Panasonic DP-CL21M PCL 5c,
Click on the Flip on long edge or Flip on short edge check button in the Setup tab.
Windows
Windows
Plain paper [75 – 105 g/m
Bond paper, Letterhead or Recycled Paper [75 – 105 g/m
Select Plain Paper, Thin paper, Bond / Letterhead or Recycled Paper.
Select Automatically Select, Tray 1, Tray 2 or Tray 3.
Select Letter, Legal, A4 or B5 (JIS).
Macintosh
Performing Automatic Duplex Printing
2
(16 – 20 lb.)] /
2
(20 – 28 lb.)] /
183
1 1
or Tray 3* (option).
2
(20 – 28 lb.)]