Printing On Transparency, Label Or Envelope; Automatic Duplex Printing; Using The Printer Panel - Panasonic KX-P8415 Setup And Reference Manual

Printing on Transparency,
Label or Envelope
1
Display the print window in the application
software.
2
Select Panasonic KX-P8415 printer and click
Properties.
3
Click Paper tab.
Select paper size (#), paper source ($) and
4
media type (%).
BIf transparency tray is used, select
AutoSelect Tray of Paper source.
BIf media is loaded on the multi-purpose tray,
select Multi-purpose Tray of Paper source.

Automatic Duplex Printing

Installing the 2nd cassette feeder with ADU option
enables automatic duplex printing .
Be sure that the Duplex Unit must be added to the
Installed Options on the Option tab in the printer
driver before automatic duplex printing is possible.
1
Display the print window in the application
software and click Properties.
2 Display the Setup tab of the Panasonic
KX-P8415 Properties window.
3 Enable Flip on long edge (
A
short edge (
A
For the detailed information, refer to the "Settings
and Printing" of the Operating Instructions installed
on your computer.
20
) or Flip on
A A
).

Using the Printer Panel

It is possible to see the following menus to configure
the printer by printing the menu map.
BTest page, Bias Adjustment, Maintenance, Image
Area, Power Saver, Network Protocol Setup*
Adjustment to Media, Language.
* 1 This menu wil not appear if the network card is not
installed in the printer.
To print the menu map,
1
Press the MENU/EXIT button on the printer
panel. Press the H H /ENTER button.
Press the F F /CONTINUE or G G /CANCEL
2
button until the Menu Map is displayed. Press
the H H /ENTER button.
The menu map will be printed.
#
To perform the setting:
1
Press the MENU/EXIT button to enter the
menu mode.
Set the printer using the following buttons.
2
$
Button
%
F/CONTINUE
G/CANCEL
H/ENTER
3
Press the MENU/EXIT button to exit the menu
mode.
Operation
Display the next menu or item
Increase the numerical value of
the selection by 1 or display the
next selection
Display the previous menu or
item
Decrease the numerical value of
the selection by 1 or display the
previous selection
Enter a sub-menu
Activate a selection
,
1