Troubleshooting - Panasonic WORKIO DP-CL21 Setup Manual

Setup
Adjusting the Density for Each Color
Independently
1
Press MENU/EXIT (PAUSE) button on the printer
panel.
2
Press (CONTINUE) button until Color Calibration
menu is displayed.
3
Press ENTER button.
Calibration Offset item menu appears.
4
Press (CONTINUE) button.
CYAN item menu appears.
5
Press ENTER button.
0* (-5 to 5) selection menu appears.
6
Press (CONTINUE) or
darken/lighten the cyan color to match with the cyan
color of the Color Calibration Card.
To make the color density setting of the Color
Calibration Test Page darker or lighter by 1 level,
increase or decrease a value of the CYAN density by
1 by pressing (CONTINUE) or
button.
For example, when the CYAN density is 0:
• If you wish to make the density setting darker by 1
level: Select 1 by pressing
once.
• If you wish to make the density setting lighter by 1
level: Select -1 by pressing
once.
7
Press ENTER button.
8
Repeat steps 5 through 7 for each color (MAGENTA,
YELLOW, BLACK).
• To skip a color, press
• To return to a previous color, press
(CANCEL) button.
• Before going to step 9, make sure Calib. Test Prn.
item menu is displayed.
9
Press ENTER button to reprint the Color Calibration
Test Print Page.
• The line enclosure and Gray Balance reflects the
changes made to the settings.
• If you are not satisfied with the current color density
settings, repeat the above steps.
NOTE:
• Changes made using Color Calibration are retained
until the color density is adjusted next time.
• The color density setting affects the average life of
toner.
(CANCEL) button to
(CANCEL)
(CONTINUE) button
(CANCEL) button
(CONTINUE) button.

Troubleshooting

For the detailed information, refer to the "Maintenance
and Specifications" section of the Operating Instructions.
For technical support, please contact your dealer.
The serial number is located on the label on the
rear of the unit. For your convenience, record the
number below and keep this book along with
your proof of purchase, in the event of a theft or
for future reference.
MODEL NO.
NAME OF RESELLER
SERIAL NO.
DATE OF PURCHASE
31