Panasonic WORKIO DP-CL21 Setup Manual page 24

Setup
Step 3: Setting the PostScript printer driver
For Mac OS 8.1 - Mac OS 9.2
If you want to select the DP-CL21M in Chooser, be sure
the printer is connected to the network and turn it on in
advance. Perform the following steps to select the DP-
CL21M printer.
1
Select Chooser from the Apple menu.
2
Confirm AppleTalk is active.
3
Click the AdobePS printer icon in the Chooser.
4
Select the correct AppleTalk zone if necessary.
5
Select the AppleTalk name DP-CL21M-XXXXXX
from the "Select a PostScript Printer:" scroll list.
XXXXXX indicates the last 3 byte of MAC address of
the printer network interface. You can obtain the
number (hexadecimal six digits) from the label near
the network interface connector or by printing a
configuration page.
If an icon is not appeared on the left of the printer
name you selected, follow the instructions below.
(1) Click [Create].
(2) Confirm that an icon appears to the left of the
printer name.
The DP-CL21M desktop printer icon is created on
your desktop screen.
6
Close the Chooser.
24
For Mac OS X 10.1 - Mac OS X 10.2
Before you can use a printer, you must add it in the Print
Center. If you want to select the DP-CL21M in the Print
Center, be sure the printer is connected to the network
and turned it on in advance (see "Power On" on page 28).
DP-CL21M appears in the Print Center by choosing
AppleTalk as the connection type. Perform the following
steps to select the DP-CL21M printer.
NOTE:
• Log on the computer as an Administrator.
• The Print Center is in the Utilities folder (Macintosh HD:
Applications:Utilities).
1
Open the Print Center.
2
Select Add Printer... from the Printers menu.
3
Choose AppleTalk as the connection type, and click
DP-CL21M-XXXXXX.
DP-CL21M-XXXXXX is displayed in the Printer List.
XXXXXX indicates the last 3 byte of MAC address of
the printer network interface. You can obtain the
number (hexadecimal six digits) from the label near
the network interface connector or by printing a
configuration page.
4
Confirm the Printer Model is set to Auto Select... and
click Add.
5
Close the Print Center.