Removing The Dp-Cl21P/Dp-Cl21M Software; Power On - Panasonic WORKIO DP-CL21 Setup Manual

Setup
Removing the DP-CL21P/
DP-CL21M Software
If you need to remove the DP-CL21P/DP-CL21M
software, perform the following steps.
For Windows
1
Click [Start], move the pointer to Programs,
Panasonic, and Panasonic DP-CL21P or
Panasonic DP-CL21M.
2
Click Uninstall Driver and Utilities.
3
Select Remove check button and click [Next>].
4
Follow the instructions on the screen.
5
After uninstalling, restart your computer.
For Macintosh
For Mac OS 8.1 - Mac OS 9.2
1
Open the DP-CL21M Installer Log File.
(Macintosh HD: DP-CL21M Installer Log File)
2
After confirming each location of installed files,
remove them manually.
3
Remove the DP-CL21M desktop printer icon.
NOTE:
• If you are not familiar with the Macintosh computer, you
only have to remove the DP-CL21M folder. (Macintosh
HD:Panasonic:DP-CL21M)
For Mac OS X 10.1 - Mac OS X 10.2
1
Remove the ColorSync profile CL21PS.icc.
(Macintosh HD:Library:ColorSync:Profiles:
CL21PS.icc)
2
Remove the PostScript Printer Description file
Panasonic DP-CL21M.PPD.
(Macintosh HD:Library:Printers:PPDs:Contents:
Resources:en.lproj:Panasonic DP-CL21M.PPD)
3
Click the printer (DP-CL21M or DP-CL21M-XXXXXX)
to be removed in the printer list of the Print Center,
and then click Delete (Delete Printer) from the
Printers menu.
NOTE:
• If the DP-CL21M software for Mac OS 9.2 is installed,
remove it (refer to "For Mac OS 8.1 - Mac OS 9.2").
28

Power On

Turn the printer on, then the computer.
The READY indicator on the printer starts blinking.
After approximately 30 seconds [Standard Memory
without the printer's hard disk drive at 20°C (68°F) /
65%RH / 120V], "Ready" is displayed on the printer LCD
panel.
NOTE:
• If the Self Calibration is done, it will take much time.
• When the printer enters the Power Save mode, the
POWER indicator will start blinking and "Power Save"
will be displayed on the printer LCD panel.
• When you turn on the printer for the first time, it will take
about 5 minutes to fill the printer with toner. When the
process is completed, the printer's LCD will display
"Ready".