Using The Disc Manager/Position Memory Function - Panasonic SA-HT650 Operating Instructions Manual

Using the disc manager
[VCD] [CD]
The disc manager allows you to choose one track or disc to play or
to play all five discs in succession.
1
While stopped
Press [DISC MANAGER] to select the
desired method.
Each time you press the button:
A--. (1-TRACK): One track play
l ;
l
(1-DISC): Plays one disc.
l ;
l
(ALL-DISC): Plays five discs in succession.
l ;
a--- (NORMAL): Disc manager is cancelled.
(only the current disc is played)
2
Select the disc and track.
≥When selecting "1-DISC", press [DISC] and [1]–[5].
≥When selecting "1-TRACK", press the numbered buttons.
To select a 2-digit number
Example: To select track 23: press [S10]
You can also select the track by pressing [:] and [9].
3
Press [1] (play).
To cancel disc manager
Press [∫].
To play a track or disc repeatedly
Press [SHIFT]i[REPEAT] during disc manager play (
[Note]
≥You cannot use the disc manager while "RANDOM" or "PRGM" are
on.
≥When playing video CDs with playback control in the "1-DISC" or
"ALL DISC" mode, you can play the disc without having to operate
the disc's menus.
≥The disc manager skips any DVD and WMA/MP3/JPEG discs that
are loaded.
Position Memory function
[RAM] [DVD-A] [DVD-V]
During play
Press [POSITION MEMORY] to memorize a
position.
Position memorized
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or change discs. When you turn the unit on, reselect "DVD/CD" or
reinsert the disc whose position you memorized, "RESUME" lights
on the display. Press [1] (play) to start play from the memorized
position. The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
≥This function does not work when using Disc manager.
Resume function
"RESUME" lights on the display when the unit has recorded the
position at which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
—Turn the unit off.
[2] [3].
—Select another source or change discs.
≥Press [∫] to clear the position.
Chapter Preview
[DVD-V]
The following message appears
immediately after you press [1] (play)
when "RESUME" is displayed.
Press [1] (play) while the message is
page 15).
displayed and the beginning portions of
each chapter up to the current one are
played.
Full play resumes from the point where you pressed [∫] or
[POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play
starts from where you pressed [∫] or [POSITION MEMORY].
[VCD] [CD] [WMA] [MP3] [JPEG]
Press PLAY to Preview Chapters
RQT7089
13