Discs-Basic Play; Position Memory Function - Panasonic SC-MT1 Operating Instructions Manual

Discs—Basic play
2
PROGRESSIVE OUT
AV SYSTEM
Í
SLEEP TV/VIDEO TUNER/BAND DVD/CD
FL DISPLAY
DIMMER
1
PLAY MODE
MIX 2CH
4
REPEAT
7
POSITION
CANCEL
MEMORY
POSITION
MEMORY
SKIP
CH
∫
;
TOP MENU
DIRECT
NAVIGATOR
ENTER
DISPLAY
TV VOL s
VOLUME
MUTING C.S.M.
S.SRND PL
FM MODE
SETUP ZOOM
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
1
Press [DVD/CD] to select "DVD/CD" as
the source.
To enjoy progressive video
Press [PROGRESSIVE OUT].
The television will be disrupted for a
moment but this is normal.
≥Output from this unit is interlace if you have connected to the
television through VIDEO OUT or S-VIDEO OUT or playing
PAL discs, even if "PROG." is on the display.
≥When progressive output is on, closed captions will not be
displayed.
2
Press [<] to open the disc tray and
place the disc.
≥Remove TYPE 2 and 4 discs
from their cartridges before
use. [RAM]
PROGRESSIVE OUT
VOLUME SEARCH
DOWN UP
SELECTOR PHONES
∫ ; 4
3
TV VCR/AUX
1
2 3
5 6
8 9
S10/ ENTER
0
SLOW/SEARCH
3
MENU
PLAY LIST
RETURN
TV VOL r
4
SUBWOOFER
LEVEL
SFC
CH SELECT
C.FOCUS TEST
GROUP AUDIO
AAC DTS ZOOM
DIGITAL C.F
SFC SSS
D.MIX PG PROG. CSM
≥Label-up (With double-sided
discs, load so the label for the
side you want to play is facing
up.)
3
Press [1] (play).
The disc tray closes and play begins.
[WMA] [MP3] [CD] (CD text only)
Group and track names are displayed on the television.
≥To turn the display on or off
≥You can also use the navigation menus to control play
( page 19).
4
Adjust the volume.
Turn the inner dial on the main unit.
0 dB
– – dB
(Minimum) (Maximum)
∫ To pause play
Press [;] during play.
Press [1] (play) to restart play.
∫ To stop play
Press [∫] ( below, Resume function).
[Note]
≥If "$" appears on the television
The operation is prohibited by the unit or disc.
≥It may take some time for play to start but this is normal.

Position Memory function

[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play
Press [POSITION MEMORY] to memorize a
position.
Position memorized
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or open the disc tray. When you turn the unit on, reselect "DVD/CD"
or reinsert the disc whose position you memorized, "RESUME" lights
on the display. Press [1] (play) to start play from the memorized
position. The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
Resume function
"RESUME" lights on the display when the unit has recorded the
position at which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
—Turn the unit off.
—Select another source or open the disc tray.
≥Press [∫] to clear the position.
Chapter Preview
[DVD-V]
The following message appears
immediately after you press [1] (play)
when "RESUME" is displayed.
Press [1] (play) while the message is
displayed and the beginning portions of
each chapter up to the current one are
played.
Full play resumes from the point where you pressed [∫] or
[POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play
starts from where you pressed [∫] or [POSITION MEMORY].
page 22, Disc information 5
Press PLAY to Preview Chapters
RQT6719
13