Setup Utility
Security Menu
Boot Prompt Configuration
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for Setup" is not
displayed on [Panasonic] boot screen. However U (F2) and will work even if the message is not
displayed.
*4
Password on Boot
Set Supervisor Password
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
User Password Protection
*4
Set User Password
• Can be changed only when [Set Supervisor Password] is set.
Embedded Security (TPM)
• For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Click [start] - [Run], and input [c:\util\drivers\tpm\readme.pdf ], and click [OK].
Fingerprint Security
• Only for model with Fingerprint Reader
*4
<For Numeric keyboard model>
Only Numeric keyboard can be used even if the USB keyboard is connected.
*4
91
Underlined items are the factory presets.
Disabled
Enabled
Disabled
Enabled
Enter the sub-menu.
Disabled
Enabled
No Protection
Protected
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.