Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>
There are 3 ways of disabling and enabling wireless communication.
The wireless switch is at right next to DC-IN jack.
Wireless Switch Utility (
Settings in the [Advanced] menu of the Setup Utility (
NOTE
For further information about Wireless LAN:
For further information about Bluetooth:
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The Wireless Switch
1
Open the cover.
Slide the latch down to unlock the cover.
A
Open the cover.
B
To disable all wireless communication
2
Switch (A) to OFF
To enable wireless communication
2
Switch (A) to ON
In the default setting, the wireless switch enables all wireless devices when it is set to ON.
page
79)
page 81
page 84
page
89)
78