Checking The Computer's Usage Status - Panasonic Toughbook CF-U1A1B1G2M Reference Manual

Troubleshooting (Advanced)
Others
No response.

Checking the Computer's Usage Status

You can check the computer's usage status in the PC Information Viewer. You may need this information when calling Pana-
sonic Technical Support for advice.
NOTE
This computer periodically records the management information of the flash memory etc. The maximum data volume
for each record is 2048 bytes. The information is only used for estimating the cause when the flash memory goes
down by any possibility. They are never sent to outside via network nor used for any other purpose except for the pur-
pose described the above.
To disable the function, add a check mark for [Disable the automatic save function for management information his-
tory] in [Hard Disk Status] of PC Information Viewer, and click [OK].
If you have not logged on with the administrator authority, some information will be displayed as [Not Found].
As long as it is activated, the PC Information Viewer will appear in front of all other screens.
Depending on your network environment, it may take sometime to start up PC Information Viewer.
If you use a guest account to log in, some of the PC Information may appear as undetected.
1
Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Information
Viewer].
2
Select the item to display the detailed information.
Press Ctrl,
(Shift)
close the software application.
An input screen (e.g., password input screen at startup) may be hidden behind
another window. Use Alt
Shut down by pressing and holding the power switch for 4 seconds or longer,
and turn on the computer and open the application again. If Windows runs cor-
rectly, but the application software does not start, click [start] - [Control Panel] -
[Add or Remove Programs] and remove the failing application software, then
reinstall the application software.
*4
For Numeric keyboard model, use a USB keyboard.
*5
For Numeric keyboard model :
*4 *5
, Fn and Tab (ESC)
to open Task Manager and
*4
+Tab to check.
Esc
110