Panasonic Toughbook CF-U1A1B1G2M Reference Manual page 67

Fingerprint Reader
We recommend you use the Power-on Security feature. This feature prevents unauthorized access to the user's
computer at the BIOS level.
After first finger enrollment, [Power-on Security] message appears. Select [Yes].
When the [Power-on Security] screen appears, click [Manage Passwords].
A
Select [Power-On] in [Password Types], and click [Set password].
B
Enter the password for [Power-on Security], and click [OK].
C
Click [Close].
D
Add a check mark for [Power-On] in [Password Types].
E
Enter the password (step C), and click [OK].
F
Click [Next].
G
• Follow the on-screen instructions.
NOTE
To use the Power-on Security feature, enable it by following the steps described above.
Do not use the fingerprint lists in the Setup Utility to change the setting for [Power-on Security] except for the specific
case such as the Finger print device cannot be used.
When you use the Power-on-Security feature, the fingerprints are stored in the fingerprint sensor regardless of the
selected enrollment mode. The number of the available fingerprints appears in the display.
67