Icom IC-905 Advanced Manual page 144

11
D-STAR OPERATION (ADVANCED)
Message operation
You can save up to 5 short messages in the
transceiver's memory to transmit in the DV mode
Each message can contain up to 20 characters
D Entering a TX message
Example: Entering "JAPAN TOM" into TX message
memory number 1
1 Open the TX MESSAGE (DV) screen
» SET > My Station > TX Message (DV)
2 Touch a TX message memory number for 1
second
3 Touch "Edit"
4 Enter a message of up to 20 characters, then
touch [ENT]
5 To close the TX MESSAGE screen, push
D Transmitting a message
You can transmit a preset TX message by pushing
[PTT] in the DV mode First, select a TX message
which also turns ON the Message Transmission
function
1 Open the TX MESSAGE (DV) screen
» SET > My Station > TX Message (DV)
2 Touch a TX message memory number
L To not transmit any message, touch "OFF"
3 To close the TX MESSAGE screen, push
L Information
• The message is transmitted along with your voice signal
• The message is transmitted each time you transmit
• When continuously transmitting, the selected TX
message is transmitted every 30 seconds
D Deleting a TX message
You can delete the TX messages
Example: Deleting TX message "JAPAN TOM" from
TX message memory number 1
1 Open the TX MESSAGE (DV) screen
» SET > My Station > TX Message (DV)
2 Touch a TX message memory number for 1
second

3 Touch "Clear"
• The confirmation dialog is displayed.
4 Touch [YES]
• Clears the entered message
5 To close the TX MESSAGE screen, push
11-12