Icom IC-905 Advanced Manual page 143

11
D-STAR OPERATION (ADVANCED)
REPEATER DETAIL screen
Depending on the content, such as position data or
UTC offset, the distance between your location and
the repeater or the repeater time can be displayed on
the REPEATER DETAIL screen
The detail screen can also be entered from the FROM
SELECT screen
Example: Displaying the "Hirano" repeater detail
screen
1 Touch "TO" to select, and then touch "TO" again
2 Touch "Gateway CQ"
3 Touch "12: Japan"
4 Touch "Hirano" for 1 second
5 Touch "Detail"
• Displays the REPEATER DETAIL screen
6 To close the REPEATER DETAIL screen, push

The REPEATER DETAIL screen
Repeater Call sign
Repeater name
Sub name
Group number
Repeater frequency
Direction to the
repeater*
L If there is no position data, the distance and direction to
the repeater are not displayed. See page 11-5 to confirm
your location
L When selecting an FM repeater, the tone setting is
displayed
L When selecting a DD repeater, the Gateway IP address is
displayed
* When "POSITION" (p 11-28) is set to "Approximate" on
the repeater list, the direction data is not displayed if the
distance to the repeater is less than 5 kilometers
TIP: You can display the REPEATER DETAIL screen
when the DR screen is displayed When you set the
repeater as shown below, touch the repeater for 1
second, and then touch "Repeater Detail"
11-11
Repeater type
Repeater time Duplex setting
Distance to the
repeater