Using 4- Or 6-Channel Audio Function - MSI MS-6533E Manual

Appendix

Using 4- or 6-Channel Audio Function

After installing the audio driver, you are able to use the 4-/6-channel
audio feature now. To enable 4- or 6-channel audio operation, first connect 4
or 6 speakers to the appropriate audio connectors, and then select 4- or 6-
channel audio setting in the software utility.
Attaching Speakers
To perform multichannel audio operation, connect multiple speakers to
the system. You should connect the same number of speakers as the audio
channels you will select in the software utility.
The audio connectors on the back panel already provide 2-channel
analog audio output function. The back panel's audio connectors can be
transformed to 4-/6-channel analog audio connectors automatically when
you select correct setting in the software utility. For information about the
setting, refer to Selecting 4- or 6-Channel Setting later in the section.
Make sure all speakers are connected to Line Out connectors. Diverse
connector configurations for 2-, 4- and 6-channel using back panel connec-
tors are described on the next page
Note:
If the Center and Subwoofer speaker exchange their audio
channels when you play video or music on the computer, a
converter may be required to exchange center and subwoofer
audio signals. You can purchase the converter from a
speaker store
.
A-4