Unpack And Inspect The Unit; Contents Of Adtran Shipments - ADTRAN NetVanta 100 Series Hardware Installation Manual

Table of Contents

Advertisement

Introduction
Hardware encryption support for the WiFi protected access (WPA) and IEEE 802.11i security
specifications provides Advanced Encryption Standard (AES), Temporal Key Integrity Protocol
(TKIP), and Wired Equivalent Privacy (WEP)
802.11bg radios configurable in the 2412 to 2462 MHz band in FCC coverage areas (refer to Wireless
Radio Channel Ranges on page 8 for channels supported in FCC coverage areas)
802.11a radios configurable in the 5180 to 5220 MHz band for FCC coverage areas (refer to Wireless
Radio Channel Ranges on page 8 for channels supported in FCC coverage areas)
Dynamic frequency selection/transmit power control (DFS/TPC) for international operation
Dimensions: 1.8-inch H x 7.5-inch D x 5.4-inch W (45 mm H x 190 mm D x 137 mm W)
Environmental
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage/Transport Temperature: 68°F to 185°F (20°C to 85°C)
• Humidity: Up to 95 percent, noncondensing

Unpack and Inspect the Unit

The NetVanta 150 WAP is shipped in its own cardboard shipping carton. Open the carton carefully, and
avoid slicing too deeply into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Support page on the ADTRAN website at http://www.adtran.com/support).

Contents of ADTRAN Shipments

Shipment of the NetVanta 150 WAP includes the following items:
NetVanta 150 base unit
Two dual-band antennas
NetVanta 150 Wireless Access Point Quick Start Guide
Ethernet cable
Optional power supply
18
NetVanta 100 Series Hardware Installation Guide
Copyright © 2010 ADTRAN, Inc.
61700412E1-34C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvanta 1501700412e14700412e14700412e1-in1700405g1

Table of Contents