Introduction; The Netvanta Solution; Features And Specifications - ADTRAN NetVanta 100 Series Hardware Installation Manual

Table of Contents

Advertisement

1.

INTRODUCTION

This hardware installation guide describes the NetVanta 150, details basic functionality, gives installation
instructions, and lists unit specifications. For more information on configuration for a specific application,
refer to the quick configuration documents provided on the ADTRAN website at http://kb.adtran.com. For
details on the command line interface (CLI), refer to the AOS Command Reference Guide, also on the
website.

The NetVanta Solution

The NetVanta 150 is a wireless access point (WAP) designed for use in conjunction with an access
controller to provide a combined solution for wireless local area networks (WLANs). The NetVanta 150
can provide a secure gateway for wireless clients to connect to the wired network provided by NetVanta
switch and router products. This unit offers the following features:
• Power from a Power over Ethernet (PoE) enabled RJ-45 Ethernet connection or from an ADTRAN
external 12 VDC converter supply.
• IEEE 802.11a, 802.11b, and 802.11g wireless access support. (It supports concurrent 802.11a and
802.11bg connections.)
• Two integral RP-SMA connectors for connecting standard dual-band antennas.
• Two dual-band antennas (included as standard equipment).
• A single 10/100Base-T Ethernet port for connection to the NetVanta switch/router product.
• Four LEDs to indicate status, WAN/LAN activity, and radio activity information.
• Reset switch for restoring default configuration.
The NetVanta 150 configuration is provided through a wireless fidelity (WiFi) controller-capable NetVanta
switch/router on the WAP's local broadcast domain.

Features and Specifications

The following list highlights the major features of the NetVanta 150 WAP.
IEEE 802.11a wireless radio
IEEE 802.11bg wireless radio
Concurrent 802.11a and 802.11bg connections
Two rear-panel dual-band RP-SMA detachable antennas
One 10/100Base-T Ethernet interface
802.3af PoE support
WEP/WPA/WPA2 wireless security
Four front panel LED indicators
One rear panel reset switch
802.11h support
802.11j support
Draft IEEE 802.11e WMM quality of service (QoS) support
WMM WiFi certified
61700412E1-34C
Copyright © 2010 ADTRAN, Inc.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvanta 1501700412e14700412e14700412e1-in1700405g1

Table of Contents