General Set Up; Dry Pick Up Operation - Shop-Vac SL Series User Manual

FIGURE 7
7. Apply pressure to front of
hose holder to snap into place.
(FIGURE 8). Return tank to
upright position.
FIGURE 8
GENERAL SET UP FILTER
8. Before replacing tank cover,
refer to Dry Pick Up or Wet
Pick Up Operation in user
manual to ensure you have the
proper filters installed for your
cleaning operation.
9. Replace tank cover, and apply
pressure with thumb to each
latch until it snaps tightly into
place. Make certain all lid
latches are clamped securely.
10. Insert machine hose end into
inlet of tank. Twist slightly to
tighten the connection.
11. Attach the extension wands to
the accessory end of the hose.
Twist slightly to tighten the
connection. (FIGURE 9)
FIGURE 9
12. Attach one of the cleaning
accessories (depending on
your cleaning requirements)
on the extension wands.
Twist slightly to tighten the
connection. (FIGURE 9)
13. Plug the cord into the wall
outlet. Your cleaner is ready for
use. I = ON, O = OFF.
NOTE: Many more useful
tools are available at your
local dealer, or Shop-Vac®
website.
Questions?
Visit www.shopvac.com
24 hours a day.
INSTALLATION
AND CLEANING
DRY PICK UP
OPERATION
NOTE: Never use the vacuum
for dry pick up without a dry
use filter installed on the
lid cage. Using the vacuum
8 Eng.