Lubrication; Storage - Shop-Vac SL Series User Manual

shuts off suction will result
in extensive damage to the
motor. To continue use, empty
the liquid waste from the tank
as outlined in the previous
section.
NOTE: IF ACCIDENTALLY
TIPPED OVER, THE VACUUM
COULD LOSE SUCTION. IF
THIS OCCURS, TURN THE
UNIT OFF AND PLACE VAC
IN UPRIGHT POSITION. THIS
WILL ALLOW THE FLOAT TO
RETURN TO ITS NORMAL
POSITION, AND YOU WILL
BE ABLE TO CONTINUE
OPERATION.

LUBRICATION

45. No lubrication is necessary
as the motor is equipped with
lifetime lubricated bearings.

STORAGE

46. Before storing your vacuum
cleaner the tank should be
emptied and cleaned. The
power cord can be wrapped
around the cord wraps
provided on the tank cover on
rear of unit. (FIGURE 24)
15 Eng.
FIGURE 24
47. Accessories may be stored in
the tool holder. (FIGURE 25)
FIGURE 25
THE VACUUM SHOULD BE
STORED INDOORS.