Siemens SIMATIC V2 Operating Instructions Manual page 90

Technical information
7.1 Certificates and approvals
IEC/UL 61010-2-201
The devices meet the requirements and criteria of the IEC/UL 61010 standard, Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part
2-201: Special requirements for control equipment.
IEC 61131
The devices meet the requirements and criteria of IEC 61131-2, Programmable Logic
Controllers, Part 2: Operating resource requirements and tests.
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4 Generic standards – Emission standard
for industrial environments.
This product meets the requirements of the standard EN 61000-6-4 Generic standards –
Emission standard for industrial environments.
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A 급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Note that this device conforms to Limit Class A for emission of radio interference. This device
can be used in all areas except the residential area.
Identification for Eurasion Customs Union
• EAC (Eurasian Conformity)
• Customs union of Russia, Belarus and Kazakhstan
• Declaration of conformity according to Technical Regulations of the Customs Union (TR
CU)
WEEE label (European Union)
Disposal instructions, observe the local regulations and the section "Recycling and disposal
(Page 83)".
Marine approvals
The following acceptance tests for marine and offshore applications are planned for the
standard versions, extended versions and PRO devices:
• ABS (American Bureau of Shipping)
• BV (Bureau Vertias)
90
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE