Table of Contents
Advertisement
P.O. Box 1963
D-92209 Amberg
You can download information on the EC Declaration of Conformity, here under the keyword
"Declaration of Conformity":
• IFP certificates (https://support.industry.siemens.com/cs/ww/en/ps/16788/cert)
• IFP PRO certificates (https://support.industry.siemens.com/cs/ww/en/ps/21662/cert)
UK Conformity Assessed marking
The HMI device complies with the designated British standards (BS) published in the official
consolidated list of the British Government. The HMI device meets the requirements and
protection targets of the following regulations and related amendments:
• Electrical Equipment (Safety) Regulations 2016 (Low Voltage)
• Electromagnetic Compatibility Regulations 2016 (EMC)
• Regulations on the restriction of the use of certain hazardous substances in electrical and
electronic equipment 2012 (RoHS)
When the device has Ex approval, the following also applies:
• Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016 (Explosion Protection)
UK Declarations of Conformity for the respective authorities are available from:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
The UK Declaration of Conformity is also available for download from the Siemens Industry
Online Support website under the keyword "Declaration of Conformity".
UL approval
Observe the following notes:
• The device shall be supplied from an isolating source.
• Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
• UL 61010-2-201
E-file numbers: E472609
• CAN/CSA C22.2 No. 61010-2-201
or
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
Technical information
7.1 Certificates and approvals
85
Advertisement
Table of Contents
