Remote Control Code - Panasonic SC-HTB385 Operating Instructions Manual

Connecting a paired
Bluetooth
®
Press [ ] to enter Bluetooth
"BLUETOOTH READY" is indicated on the display.
Select "SC-HTB385" from the
Bluetooth device's Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
Press and hold [ ] until the "BLUETOOTH
READY" is indicated on the display.
≥ When "BLUETOOTH" is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth device.
®
≥ The Bluetooth device will be disconnected if a different
®
audio source (e.g. "TV") is selected.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to page 21 "LINK MODE".
device
mode.
®
®
device
®

Remote control code

When other Panasonic devices respond to this
system's remote control, change the remote
control code on this system and the remote
control.
Preparation
≥ Turn off all other Panasonic products.
≥ Turn on the main unit.
∫ To set the code to "REMOTE 2"
Press and hold [MUTE] and [OK] for more than
4 sec.
"REMOTE 2" is indicated on the display.
∫ To set the code to "REMOTE 1"
Press and hold [MUTE] and [4] for more than
4 sec.
"REMOTE 1" is indicated on the display.
17
RQT0B25