Firmware Firmware Update - Toro EVOLUTION Series Quick Start Manual

Firmware
The Firmware function allows you to review the controller's firmware version. Press SELECT
FIRMWARE
CONTROLLER 01.09
Firmware Update
The EVOLUTION controller's firmware can easily be updated by downloading the latest software from
®
www.toro.com/evolution/. A USB flash drive is needed for this procedure. For further help, look for the
firmware update video demonstration in the website.
Step 1 – Connect USB to the controller. See Figure 14 .
Step 2 – Click the ADVANCED button. Use the Up
Step 3 – Select UPDATE and Press SELECT
ADVANCED
SCHEDULE DETAILS
SENSORS
ADD/REMOVE DEVICE
DIAGNOSTICS
FIRMWARE
Step 4 – Controller displays the firmware version in the controller (current) and the version on the USB drive (update). If the update version is more up-
to-date than the current version, press SELECT on YES. Firmware file is updated and a status bar will indicate the progress. Once finished, the
controller does a soft reboot and the update process is complete.
ADVANCED
UPDATE VERIFIED
CUR. VERSION 02.10
UPDATE VERSION 02.20
CONTINUE UPDATE
Step 5 – Press ADVACED, and select FIRMWARE, then VERSION to verify the firmware version.
or Down
. Select another UPDATE menu to start the process.
FIRMWARE
VERSION
UPDATE
SOFT BOOT MODE V2.20
USB DRIVE ATTACHED
WRITE: 33%
YES
to access the firmware version.
arrows to select FIRMWARE.
FIRMWARE
CONTROLLER UPDATE
VERIFYING UPDATE
SETUP
REGION US/CAN
LANGUAGE ENGLISH
DATE FORMAT MM/DD/YY
CLOCK 12 HOUR
TIME 12:01AM
DATE 01/01/13
Figure 14
USB
FIRMWARE
33%
17