Troubleshooting - Panasonic WV-NP1004 Operating Instructions Manual

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not
described below.
Symptom
The power cannot be turned
on.
Check the power cable, AC inlet and the power plug periodically.
Symptom
The power cable insulation is
damaged.
The power cable, AC inlet or
the power plug are hot during
use.
The power cable gets warm or
hot if bent or pulled during use.
22
Cause/solution
• Is the power cable connected to the AC 24V power
supply?
→ Confirm the cable is firmly connected.
Cause/solution
• The power cable, AC inlet or the power plug is damaged.
If you continue to use it, a fire or an electric shock may occur.
Unplug the power plug immediately, and refer servicing to qualified service
personnel.
Reference pages
10
Reference pages