Kohler K-20629T-BW Installation Instructions Manual page 35

5. Unscrew the metal weaved hose nut and push the quick
release connector as shown to take out the inlet valve.
5. 如图拧下金属编织软管螺母，按箭头方向推动进水阀快拆接
头，取出进水阀。
6. Push aside the snap of the toilet detergent box as shown to
take the box out.
6. 如图拨动洁厕剂盒的拨手，取出洁厕剂盒。
7. Push aside the pivot snaps of the full-flush and half-flush
towards upper right to separate the lever and pivot. Hold the
upper end of bracket by hand and then lift up firmly to unlock
the bracket.
Note: Push aside the pivot snaps of the full-flush and half-
flush towards lower left to fixate the bracket to the locked
state.
7. 右上方拨开大排和小排的转轴拨手，使杠杆和转轴分离。用手
握住支架的上端，然后用力向上提拉把支架的锁紧拨开。
注：支架装回时，左下方拨动大排和小排的转轴拨手至锁紧状
态。
8. Hold the upper end of fastener by hand as shown. Pull in the
direction of arrow to take out fastener.
8. 如图用手握住固定扣的上端向箭头方向拨动，然后取出固定
扣。
1402749-K2-A
Conntector, Quick Release
进水阀快拆接头
Metal Weaved Hose Nut
金属编制软管螺母
Snap
拨手
Snap (Locked)
转轴拨手 （目前锁附状态）
Lever Snap
杠杆扣
Fastener
固定扣
-28-
Fastener
固定扣