Installation/Troubleshooting
1.3
Camera Feature Locations
1.3.1
Front View
Indicator Display
Power
on
Normal Operation*
Automatic
Setup
Using
Getting IP address*
DHCP
Updating Firmware
Pressing FACTORY
DEFAULT RESET button
UPnP
Internal Failure
*
The indicator turns orange if the camera is not connected to the LAN.
1
*
The indicator blinks orange if the camera is not connected to the LAN.
2
*
See page 40.
3
10
Auto Focus/Zoom Lens
Wide: 5 mm (0.2 inches)—Infinity
Tele: 1 m (39.4 inches)—Infinity
Indicator
The indicator color shows camera status.
Not on the LAN
On the LAN
1
Setting
Finished setting
2
Got IP address
TM
Failure
Orange blinking
Orange blinking
Green blinking
Green blinking
Green blinking
Orange blinking
Orange blinking
(The camera restarts after that.)
Orange blinking (About a 2-second interval)
Red blinking*
Green blinking
Green
Green
Green
Turning off
3
Green