Panasonic KX-HCM280A Installation/Troubleshooting Manual page 13

3.
Connect the AC adaptor cord to the DC In jack, and plug the AC cord into the
outlet.
• The AC cord is used as the main disconnect device, ensure that the
socket-outlet is located/installed near the equipment and is easily
accessible.
• Use only specified Panasonic AC adaptor PSLP1242 (Order No.
PSLP1242Y).
• If the indicator does not light green, see page 39.
• A noise can be heard during pan/tilt operation. This is normal.
4.
Hook the AC adaptor cord to the Hook for AC adaptor cord.
[For assistance, please call: 1-800-272-7033]
DC IN jack
AC adaptor
Installation/Troubleshooting
Hook for AC adaptor cord
Power Outlet
AC cord
13