Repetitive Defects Gauge - Kyocera Ecosys FS-600 Service Manual

Repetitive defects gauge

Use the following measurements for checking repetitive occurrences on the printed page.
See the above section for details.
First occurrence of defect
19.96 mm—Magnet roller (Process unit)
24.86 mm—Top registration roller
38.80 mm—Bottom registration roller
45 mm—Transfer roller
56.10 mm—Fuser heat roller
62.82 mm—Fuser press roller
94.25 mm—Drum unit (Process unit)
6-33
Troubleshooting
Print quality problems
FS-600/FS-680