Loading Paper (A4 Size); Using Plain Paper - Canon BJC-3010 User Manual

Loading Paper (A4 size)

This section describes the paper loading procedure using A4-size plain paper.

Using Plain Paper

1
Raise the paper rest.
2
Fan the stack to remove static cling and align
the edges of the stack by tapping it on a flat
surface. (Loading the paper without first fan-
ning and aligning the edges could cause
paper jams.)
To avoid touching the print surface, always handle media by the edges. Unclean or scratched
print surfaces can adversely affect print quality.
3
Load the stack of paper as follows.
Align the stack with the right side of the auto sheet
feeder and insert it into the auto sheet feeder.
(You can print on either side of plain paper.)
Slide the paper guide to the left side of the stack
until it is snug.
Make sure that the top of the stack is not higher than the load limit mark. Maximum load capaci-
ty for plain paper is approximately 100 sheets (64 g/m
4
Make sure that the paper thickness lever is set to the Up position.
20
Paper rest
Load limit mark
Print side
Paper guide
2 ).