Introduction, Product Features & Specifications - Kidde P4010ACSAQ-WF User Manual

5. Introduction, Product Features and Specifications
Introduction
This alarm detects products of combustion using photoelectric technology. The device also monitors the indoor air
quality of the residence. Ten (10) years after the unit was activated, this unit will automatically alert you that it is time to
replace the unit. This is called "End of Unit Life" mode. See Troubleshooting Guide. To help identify the date to replace
the unit, a label has been affixed to the side of the alarm. Write the "Install date" in the space provided, and then write
in the "Replace by" date (10 years from initial power up) in permanent marker on the label prior to installing the unit.
noTe: AC power must be connected to obtain the full 10 year battery and unit life.
Product Features and Specifications:
• Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)
• Humidity: Operating range: up to 95% RH non-condensing
• Audible Alarm: 85+ dB at 10' 3.0 to 3.5 KHz pulsing alarm, with voice message
"Fire!"
• Smoke Sensor: Photoelectric
• Indoor Air Quality Monitoring
NOTE: The indoor air quality sensors and features are not designed for life safety, and are not OSHA or UL certified.
These features offer additional notifications to the consumer, and will not affect life safety performance (smoke and
CO detection) of your Wi-Fi alarm.
• Voice message system
• Smoke Alarm Hush
• Ambient Light Sensing
• Powered by 120VAC (60 Hz, 53 mA max) wire-in connector with sealed lithium battery backup
• Hardwire Interconnect
• Wi-Fi Compatible to Mobile Device ( Requires 802.11b/g/n (2.4GHz) Wi-Fi ). noTe: wi-Fi features do not
function without AC power.
• One large, user-friendly button
8
Control
TM