Table of Contents
Advertisement
3. Assemble the burner in a reverse sequence.
Before you fix the screw, make sure that the
burner is pushed correctly to the back panel.
Test the grill injectors.
LEVELLING
CAUTION! Remove all the
accessories from the oven.
1. Open the lid of the appliance and disassemble
it.
2. Disassemble the pan supports and all the
burner assemblies.
3. Put the appliance on the sidewall on a clean
and smooth surface. Place each foot into a
separate hole, in the plinth, and rotate it
clockwise.
4. If the floor is not equally flat, use the adjustable
feet on the bottom of the appliance to set a
stable position for the appliance.
To install all the accessories, do the first step in an
opposite sequence.
ELECTRICAL INSTALLATION
WARNING! The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied with a main plug and a
main cable.
WARNING! The power cable must
not touch the part of the appliance
shaded in the illustration.
B
23
Advertisement
Table of Contents
