Table of Contents
Advertisement
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash the
pan supports by hand and dry them. If
necessary, remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports, make sure
that they are in correct positions.
OVEN - DAILY USE
WARNING! Refer to Safety chapters.
OVEN FUNCTIONS
Oven function
Off position
Maximum gas supply
Minimum gas supply
Grilling
Oven lamp
MANUAL IGNITION OF OVEN GAS BURNER
Oven safety device:
The gas oven has a thermocouple. It
stops the gas flow if the flame goes
out.
1. Open the oven door.
2. Hold the flame near the hole in the bottom of
the oven cavity.
10
4. For the burner to operate correctly, make sure
that the arms of the pan supports are aligned
with the centre of the burner.
PERIODIC MAINTENANCE
Speak to your local Authorised Service Centre
periodically to check the conditions of the gas
supply pipe and the pressure adjuster, if fitted.
Application
The oven is off.
To adjust the oven temperature - highest setting.
To adjust the oven temperature - lowest setting.
To grill flat food in the middle of the grill. To make toast.
To illuminate the oven interior.
To use this function, press the button for the lamp.
3. At the same time push the knob for the oven
functions and turn it counterclockwise to the
maximum gas flow position.
4. When the flame comes on, keep the knob for
the oven functions pushed on the maximum gas
flow position for 15 seconds or less to let the
thermocouple warm up.
Advertisement
Table of Contents
