Greeting Message; Listening To Messages Using The Base Unit - Panasonic KX-TG9331T Operating Instructions Manual

Greeting message

When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a pre-recorded greeting message.
Recording your greeting
message
You can record your own greeting
message (2 minutes max.).
1
{GREETING REC}
2
Within 10 seconds, press
{GREETING REC} again.
3
After the base unit beeps, speak
clearly about 20 cm (8 inches) away
from the MIC.
4
Press {■} (STOP) to stop recording.
Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a pre-
recorded greeting message for callers
and asks them to leave messages. If the
message recording time (page 39) is set
to "Greeting only", caller messages
are not recorded and the unit plays a
different pre-recorded greeting message
asking callers to call again.
Playing back the greeting
message
Press {GREETING CHECK}.
Erasing your greeting
message
If you erase your own greeting message,
the unit plays a pre-recorded greeting
message for callers.
For assistance, please visit http://www.panasonic.com/help
Press {GREETING CHECK}, and then
press {ERASE} while your greeting
message is playing.
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Operating the answering
system
Key Operation
{^} or {V} Adjust the speaker
volume
Repeat message
{7}
(during playback)
Skip message
{8}
(during playback)
Pause message
{■}
(STOP)
– To resume playback,
– To stop playback
Erase currently playing
{ERASE}
message
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
Answering System
*1
press {6}.
completely, press
{■} (STOP) again.
35