Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 23)
– using the direct commands (page 25)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2
Press {V} or {^} to select the desired main menu. i {Select}
3
Press {V} or {^} to select the desired item in sub-menu 1. i {Select}
L In some cases, you may need to select from sub-menu 2. i {Select}
4
Press {V} or {^} to select the desired setting. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 25 for the default settings.
Main menu
Message play
V.M. access
*1
Block calls
Night mode
Ringer setting
Set date & time
Talking
CallerID
Customer
support
For assistance, please visit http://www.panasonic.com/help
Sub-menu 1
–
–
–
On/Off
Start/End
Ringer volume
Ringer tone
Date and time
Alarm
Time adjustment
–
–
Sub-menu 2
*1
*1
Programming
Page
–
–
–
–
–
–
–
–
–
–
–
–
36
41
28
29
29
–
–
16
29
–
31
30
23