Answering System; Turning The Answering System On/Off - Panasonic KX-TG9331T Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TG9331T:
Table of Contents

Advertisement

Answering System

Answering system
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages. Select "Greeting
only" as the recording time setting
(page 39).
Important:
L Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
L When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been correctly set (page
16).
Memory capacity
The total recording capacity (including
your greeting message) is about 18
minutes. A maximum of 64 messages
can be recorded.
Note:
L If message memory becomes full, the
ANSWER ON indicator on the base
unit flashes rapidly.
L When the message memory becomes
full:
– If you use the pre-recorded greeting
message, the unit automatically
switches to another pre-recorded
greeting message asking callers to
call again later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
34
For assistance, please visit http://www.panasonic.com/help
Turning the answering
system on/off
Press {ANSWER ON} to turn on/off the
answering system.
L When the answering system is turned
on, the ANSWER ON indicator lights
up.
Call screening
While a caller is leaving a message, you
can listen to the call through the base
unit's speaker. To adjust the speaker
volume, press {^} or {V} repeatedly.
You can answer the call by pressing
{C} on the handset.
L The base unit user can answer the call
by pressing {SP-PHONE}.
(KX-TG9341/KX-TG9342/
KX-TG9343/KX-TG9344)
Turning off the call screening feature
When the base unit is not in use, press
{GREETING CHECK}, then press and
hold {V} until the base unit beeps.
OR
While screening a call, press and hold
{V} until the sound goes off.
Note:
L If you adjust the speaker volume while
listening to messages or talking on the
intercom, the speaker volume for call
screening is turned on again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents