Registering A Handset - Panasonic KX-TG5631S Operating Instructions Manual

Multi-unit Operation
Answering transferred calls
Press {C} to answer the page.
L After the paging party disconnects, you
can talk to the outside caller.

Registering a handset

The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
For models with only 1 handset
included
1
Handset:
{MENU} i {0}{0}
2
Base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
3
Handset:
Press {OK}, then wait until the handset
beeps.
46
For assistance, please visit http://www.panasonic.com/phonehelp
For models with 2 or more
handsets included
Important:
L If you accidentally assign another
handset's extension number to the base
unit, the originally assigned handset
stops functioning. Confirm the extension
number of the handset by placing it on
the base unit or charger. Lift the handset
from the charger before registering.
1
Handset:
{MENU} i {0}{0}
2
Base unit:
Press {SELECT} until the desired
extension number (H1, H2, H3, or
H4) is displayed on the base unit, then
press and hold {CALL} until the
CHARGE indicator flashes.
L H4 can be used if you have 4
handsets.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
3
Handset:
Press {OK}, then wait until the handset
beeps.
Registering an additional handset
See page 6 for information on the available
models and extension numbers.
Start from step 2.