Erasing Entries; Chain Dial; Editing Entries - Panasonic KX-TG4134M Operating Instructions Manual

Shared Phonebook
5
Edit the name (10 characters max.; page
17). s {SAVE}
6
{OFF}
Finding and calling from a
phonebook entry
Scrolling through all entries
1
{C}
2
{r}: Select the desired entry.
3
{C}
Searching by first character
1
{C}
2
Press the dial key () – 9 or () which
contains the character you are searching
for (page 17).
L Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial
key.
L If there is no entry corresponding to
the character you selected, the next
entry is displayed.
3
{r}: Scroll through the phonebook if
necessary.
4
{C}
Searching by group
1
{C} s {GROUP}
2
{r}: Select the group you want to search.
s {SELECT}
L If you select "All groups", the unit
ends the group search.
3
{r}: Select the desired entry.
4
{C}

Editing entries

1
Find the desired entry (page 18). s
{EDIT}
2
Edit the name if necessary (16 characters
max.; page 17). s {OK}
3
Edit the phone number if necessary (24
digits max.). s {OK}
18 For assistance, please visit http://www.panasonic.com/help
4
{r}: Select the desired group (page 17).
s {SELECT} 2 times
5
{OFF}

Erasing entries

Erasing an entry
1
Find the desired entry (page 18).
2
{ERASE}
3
{r}: "Yes" s {SELECT} s {OFF}
Erasing all entries
1
{C} s {MENU}
2
{r}: "Erase all" s {SELECT}
3
{r}: "Yes" s {SELECT}
4
{r}: "Yes" s {SELECT}
5
{OFF}

Chain dial

This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1
During an outside call, press {MENU}.
2
{r}: "Phonebook" s {SELECT}
3
{r}: Select the desired entry.
4
Press {CALL} to dial the number.
Note:
L When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press {PAUSE} to add
pauses after the number and PIN as
necessary (page 14).
L If you have rotary/pulse service, you need
to press * (TONE) before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 17).