Table of Contents
Advertisement
TG9361BX(e)_OI.book Page 17 Wednesday, April 16, 2008 3:08 PM
Searching by first character
(alphabetically)
1
{Phonebook} i {Search}
2
Press the dial key ({0} – {9}, {*},
or {#}) which contains the
character you are searching for
(page 16).
L Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3
{V}/{^}: Scroll through the
phonebook if necessary.
4
{C}
Editing entries
1
Find the desired entry (page 16).
i {Option}
2
{V}/{^}: "Edit" i {Select}
3
Edit the name if necessary (16
characters max.; page 16). i
{Next}
4
Edit the phone number if necessary
(32 digits max.). i {Next} i
{Save} i {OFF}
Erasing entries
1
Find the desired entry (page 16).
2
{Erase} i {Yes} i {OFF}
Shared Phonebook
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
1
During an outside call, press
{MENU}.
L Instead of pressing {MENU}, you
can also press {Ph.book} if it is
shown on the display.
2
{V}/{^}: Select the desired entry.
3
Press {Call} to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 13).
L If you have rotary/pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the
dialing mode temporarily to tone.
17
Advertisement
Table of Contents
