Automatic Adjustment Procedure; If You Cannot Perform Automatic Adjustment - Epson SureColor SC-P8500DM Series User Manual

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
❏ Make sure you select the name set when you
added the media setting value or set in Custom
Paper Setting from the printer's menu as the
Paper Type.
Make sure nozzles are not clogged before
adjusting.
If nozzles are clogged, adjustments will not be
performed correctly.
Perform Print Head Nozzle Check to check if the
nozzles are clogged, and then perform Print Head
Cleaning if necessary.
"Print Head Nozzle Check" on page 172
U
Auto adjustment cannot be performed when using the
following paper.
❏ Plain Paper
❏ Enhanced Matte Board
❏ Transparent or colored paper
Perform manual adjustment when using these types of
paper.

"If you cannot perform Automatic Adjustment"

U
on page 62
Automatic Adjustment
Procedure
Automatic Adjustment performs Paper Feed Adjust
and Print Head Alignment automatically while
printing the pattern.
The pattern is printed. Load paper that is 388 mm or
wider and 558 mm or longer.
You may not be able to perform Automatic
Adjustment depending on the media you are using. If
an error occurs, or if you notice banding or graininess
in the print results even after performing Automatic
Adjustment, perform Paper Feed Adjust and Ruled
Line Alignment from the Print Adjustments menu.
"If you cannot perform Automatic Adjustment"
U
on page 62
Basic Operations
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
B
From the Home screen, press Paper Setting -
Roll 1/Roll 2/Cut Sheet/Poster Board - Print
Adjustments - Automatic Adjustment.
C
Press Standard - Auto Adjustment - Start.
Auto adjust starts, and the adjustment pattern is
printed.
Wait until adjustment is complete.
Note:
Perform the following if you are not satisfied with the
adjustments made by Automatic Adjustment -
Standard, or if you want to perform Automatic
Adjustment to match your printing needs.
Select Automatic Adjustment - Details - Auto
Adjustment. Select the items that suits your printing
needs in Select Target and Print Quality, and then
press Start.
If you cannot perform
Automatic Adjustment
Perform Paper Feed Adjust and Ruled Line
Alignment separately. In both cases, visually inspect
the printed pattern and enter the measurements to
perform adjustments.
Before making adjustments, be sure to read the
following:
"Precautions when performing Print
U
Adjustments" on page 61
Paper Feed Adjust
This menu is also used when banding (horizontal
banding, tint unevenness, or stripes) is detected in
printing results.
To adjust from the Home screen, press Paper Setting -
Roll 1/Roll 2/Cut Sheet/Poster Board - Print
Adjustments - Paper Feed Adjust - Manual.
"Paper Feed Adjust" on page 175
U
62