Table of Contents
Advertisement
Figure 112. Installing the mini Mezzanine card
5. Close the lever on the mini Mezzanine card.
Next steps
1. Follow the procedure listed in
Optional internal USB memory key
Replacing the optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of
the USB memory key: 15.9 mm width x 57.15 mm length x 7.9 mm height.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Locate the USB port or USB memory key on the system board.
2. If installed, remove the USB memory key from the USB port.
132
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Advertisement
Table of Contents
