Processor And Memory Module Blank; Removing The Processor And Memory Module Blank; Installing The Processor And Memory Module Blank - Dell PowerEdge MX760c Installation And Service Manual

Processor and memory module blank

Removing the processor and memory module blank

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. To release the processor and memory module blank from the socket, simultaneously press the ejectors on both ends of the
memory module socket to fully open.
2. Lift the processor and memory module blank away from the system.
Figure 26. Removing the processor and memory module blank
Next steps
Replace the processor and memory module

Installing the processor and memory module blank

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. To install the processor and memory module blank, first align the two guide pin in bolster with the hole of the blank.
Safety instructions.
Before working inside your
blank.
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 65