Table of Contents
Advertisement
Figure 103. Removing the M.2 SSD module
Next steps
1.
Install the M.2 SSD
module.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the M.2 SSD module at an angle with the M.2 BOSS card connector.
2. Insert the M.2 SSD module firmly until it is fully seated in the M.2 BOSS card connector.
3. Using the Phillips #1 screwdriver, secure the M.2 SSD module on the M.2 BOSS card.
124
Installing and removing system components
Safety
instructions.
Before working inside your system
Advertisement
Table of Contents
