Panasonic KX-TG2267B Operating Instructions Manual page 62

Troubleshooting
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name and
phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
During the conversation, the
other line status indication
flashes quickly and the
display shows another
caller's information.
The unit does not display the
caller's name and/or phone
number.
62
Cause & Remedy
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory
list.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•
, , or
Ö Ñ Ü á
pressed when you picked up the
handset. Press
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•You cannot store an item in the
directory while the unit is in the talk or
speaker mode.
•Do not pause for over 60 seconds while
storing.
•To answer the call, press
the called line button
the beginning after hanging up.
•Someone is calling you on the other
line. To answer, press
(HOLD/FUNCTION/CLEAR)
current call on hold. Press the line
button whose status indication is
flashing quickly on the display (p. 48).
•You need to subscribe to a Caller ID
service.
•Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.
may have been
and try again.
(OFF)
,
Start again from
.
to put the
or