Panasonic KX-TG2267B Operating Instructions Manual page 37

1 Press
(HOLD/FUNCTION/CLEAR)
2 Press at "Save directory".
á
•The display shows the number of stored items
in the directory.
3 Enter a name, up to 15 characters with the
dialing buttons,
•See the steps for entering names and symbols
(p. 38).
•If a name is not required, press Ö (Next key)
and go to step 5.
4 Press (Next key).
Ö
Enter a phone number, up to 22 digits.
5
•Each time you press
(HOLD/FUNCTION/CLEAR), a digit is erased.
To erase all of the digits, press and hold
(HOLD/FUNCTION/CLEAR).
Press (Next key).
6
Ö
•If you want to change the storing name or
number, press Ñ (Edit key) repeatedly to
reach the desired display and change it.
7 Press (Save key).
á
•A beep sounds.
•To continue storing other items, repeat from step 2.
•To exit the programming mode, press (OFF)
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 51) in step 5.
•You can exit the programming mode any time by pressing (OFF)
•If the display shows "Directory full" in step 2, the display will return to step
1, press (OFF) to exit the programming mode. To erase other stored items from
the directory, see page 43.
•If an alarm tone sounds in step 7, the item cannot be stored in the directory.
Place the handset on the base unit and try again from step 1.
For assistance, please call: 1-800-211-PANA(7262)
.
or .
Ü á
--------------
H
Save directory
Ringer volume
Directory=
20 items
Enter name
IH
Enter name
Tom Jones
IH
Enter phone no.
0987654321
IH
Tom Jones
098-765-4321
F
=Edit
Tom Jones
098-765-4321
.
.
G
=Next
G
=Next
G
=Next
H
=Save
37