Programming Summary For The Answering System - Panasonic KX-TC1230ALW, KX-TC1230NZW Operating Instructions Manual

Programming Summary for the Answering System

You can program the following functions using the handset near the
base unit. See the page numbers below for details.
Make sure the unit is in the standby mode initially.
Lift the handset, and press
Press or
Ö Ñ
Press or
Ö Ñ
•"Answering system setting" is displayed on the handset.
To set the remote code, press
To select the number of rings, press
To select the caller's recording time, press
To store a pager number, press
• The base unit display shows numbers or characters related to the adjustment
or settings.
Press (Save key).
á
•You can exit the programming mode any time by pressing (EXIT/CH).
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If 6 beeps sound on the base unit during programming, a wrong key was
pressed. Enter the correct number.
•If the handset has lost communication with the base unit, 3 beeps sound and "No
link to base
handset.
(FUNCTION/EDIT)
G
to select "Program", and press
G
to select "TAD program", and press
G
(1)
G
Place on cradle and try again." is displayed on the
.
á
.
.
(2)
.
(5)
.
(#)
(Yes key).
(Yes key).
á
(page 65)
(page 27)
(page 26)
(pages 62, 63)
25