Table of Contents
Advertisement
4.6 Security
Use this menu to configure the security settings.
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from three to 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Hard Drive Security Frozen
Use this feature to enable or disable the BIOS security frozen command for SATA and NVMe
devices. The options are Enabled and Disabled.
SMCI Security Erase Configuration
This section displays information if a storage device is detected by the system.
•
HDD Name
•
HDD Serial Number
91
Chapter 4: BIOS
Advertisement
Table of Contents
