Security - Supermicro X13DEG-M User Manual

Super X13DEG-M User's Manual

4.6 Security

This feature allows you to configure the following security settings for the system.
Disable Block Sid (Available when your storage devices support TCG)
Select Enabled to allow SID authentication to be performed in TCG storage devices. The
options are Disabled and Enabled.
The following information is displayed:
•
Administrator Password
•
User Password
•
Password Description
Administrator Password
This feature indicates if an administrator password has been installed. It also allows you to
set the administrator password which is required to enter the BIOS Setup utility. The length
of the password should be from three characters to 20 characters long.
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.
150