Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SDV-8C+-TLN2F User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (4)
JIPMB1
LED3 VGA
Aspeed
AST2500
JTPM1
S-SATA0
X11SDV-4C-TLN2F
REV: 1.02
DESIGNED IN USA
DIMME1 DIMMD1
21
Standoffs (4)
Only if Needed
Intel
X557-AT2
LAN1/LAN2
CPU
JF1
PWR OH HDD PWR
RST X NIC2 NIC1
ON FF LED LED
BT1
JBT1
DIMMA1 DIMMB1
Chapter 2: Installation
IPMI_LAN
USB 2/3(3.0)
USB0/1
JF1
LED1
PJ1